White Face Sets
for All 1981 thru 1993 240/260 Series Main Gauge Cluster
RETURN TO MAIN PAGE Updated August 8, 2013
HERE FOR ON-LINE INSTRUCTIONS
Full-color step-by-step instructions for disassembling your gauges and installing these faces.
|Adhesion Promoter is recommended to
improve the installtion of gauge face overlays. It is not needed in all
situations, however if your car may be subjected to high interior
temperatures frequently (parked outside) or many times over the years,
the adhesive on the backs of overlays can soften and allow the edges to
lift. Applying a little of this before installation on the faceplate
edges will greatly improve adhesion. For convenience, a cotton swab is
included. This isn't some mythical snake-oil. It has been tested and
Applying this stuff is easy. Dip the cotton swab in the liquid and smear the edges of the face plates where the overlays will be. It dries in seconds. CAUTION: Using this stuff makes things stick very well, so be careful when placing the overlay down. It will be harder to lift and re-position.
To Check Out or View Cart, click below button.
1981-85 240 or 260 with 120 MPH or 200 km/h speedo and tachometer (or clock)
1986-88 240 with 120 MPH or 200 km/h speedo and tachometer (or clock)
1989-93 240 with 120 MPH or 200 km/h speedo and tachomete (or clock)
These overlays are with professional grade self-adhesive vinyl with matte laminated UV covering.
If there is something else you would like to see done (color changes, other additions or deletions), feel free to ask. Most changes can be done without any extra charges.
All Main Face Sets priced as follows:
Shopping Cart Order Panel:
>>Payments, Policies and Ordering Info Page<<
BACK ONE PAGE
BACK TO MAIN 240 TURBO PAGE