Rallye and GT Faces
The above set is an original 140 Rallye cluster.
The above set is an original 142 GT cluster.
offer original and custom
gauge face overlays, designed to restore or change the look of these
Some variations shown below.
faces are printed with UV
resistant ink and have a Satin non-glare
laminated UV film over the front to protect the
face from exposure. They will not fade.
These faces are printed on professional grade vinyl with peel and stick adhesive on the back.
Below Photos 140 5-Gauge Rallye Blackface
This set is intended to restore the faces back to a new appearance.
It is available with a 130 MPH or 200 kmh speedometer.
CLICK ON PHOTO FOR HIGHER RES
|Adhesion Promoter is recommended to
improve the installtion of gauge face overlays. It is not needed in all
situations, however if your car may be subjected to high interior
temperatures frequently (parked outside) or many times over the years,
the adhesive on the backs of overlays can soften and allow the edges to
lift. Applying a little of this before installation on the faceplate
edges will greatly improve adhesion. For convenience, a cotton swab is
included. This isn't some mythical snake-oil. It has been tested and
Applying this stuff is easy. Dip the cotton swab in the liquid and smear the edges of the face plates where the overlays will be. It dries in seconds. CAUTION: Using this stuff makes things stick very well, so be careful when placing the overlay down. It will be harder to lift and re-position.
>>Payments, Policies and Ordering Info Page<<
Back to Dave's 245 Turbo Page...